- Company
- Products
- Field Support
- Projects & Applications
- Bolting Resources
Downloads
- View All Downloads
- Trial Projects
- Articles
- Install/Inspect Instructions
- .dxf/.dwg's for Detailers
- eDrawings
- PowerPoint
- Spanish Instructions
- Videos
- Torque / Wrench Capacity Chart
- Flat Washer Chart
- SS-39D Orange Silicone MSDS
- RTV 200-185 Orange Silicone MSDS
- Our Brochure
Videos
- How a DTI works
- Squirter® DTI
- Variability of Torque
- Squirter® DTI Calibration
- Things to Avoid
- FHWA IVP (bridge use only)
- One Man, One Wrench
- DTI Snug Tight
- Research Council Site Verification
- Installation and Feeler Gauge Inspection
- Squirter® DTIs in Action
- M36 Squirter® DTIs for Wind Tower Bolting
- M48 grade 10.9!!
- How to Tighten Bolts for Wind Tower Flanges
- Installation & Inspection
Installing Squirter® DTIs
Installing Standard DTIs
Installing Windpower Squirter DTIs
Spanish Instructions
Chinese Instructions
Training Videos
Application Advisories
- 1 1/4" Dia. A490 Bolts in oversized holes
- SQUIRTER® DTIs and oversized holes
- Oversized Holes: Flat Washer Chart
- Hot Dip Galvanized Flat Washers
- Using Nut End Installation with 1 1/4" diameter or Larger DTI's
- Weathering Steel DTI's on Bridges
recently viewed: Standard DTIs from...
Squirter DTI's & Squirters DTI are Registered Trademarks of Applied Bolting Technology Products, Inc.
1413 Rockingham Road Bellows Falls, Vermont, USA 05101
1413 Rockingham Road Bellows Falls, Vermont, USA 05101
©2010 Applied Bolting Technology
site by integritive web design, asheville
site by integritive web design, asheville